Bullard USA, EVA2, PAPR System c/w EVA Blower, Belt, Battery, Charger, no Filter
• Maximum of one filter or cartridge required
• “On-board” battery compartment (no external battery cables to connect)
• Filter locking tab for visual confirmation of correct installation
• Active Flow Technology (Mass Flow Sensor Feedback Loop)
• User-selectable two-speed operation (7 CFM regular speed, 8.5 CFM high speed for Loose Fitting Headtops; 4.5 CFM regular speed, 5.0 CFM high speed for Spectrum Series Full Face Mask)
• Multiple sizes available for breathing tubes
Alarms: Audible Low Battery and Low Flow, Audible High Temperature at 122º F / 50º C
Operating Temperature: -5º C to 54º C
Storage Temperature: -5º C to 55º C
Belt Specifications: Closed cell foam belt, Adjustable for waist sizes between 28-inches and 60-inches (71 cm and 152 cm)
Battery Specifications: Rechargeable Lithium Polymer technology, Fuel gauge to visually indicate remaining capacity, 4-10 hours of run time on a single battery
| Brand: Bullard Safety |
Norms and Standards:
A NIOSH approved EVA Powered Air-Purifying Respirator System consists of four components:
(1) Hood or Mask
(2) Breathing Tube
(3) Purifying Filter Cartridge
(4) Blower Assembly
All of these components must be present and properly assembled to constitute a NIOSH-approved respirator.